- Home
- Departments
- Fire Department
- Safety Tips
- Preventing Home Fires
Preventing Home Fires
The New Hampshire Association of Fire Chiefs joins the National Fire Protection Association and the New Hampshire State Fire Marshal's Office, and national organizations to draw attention to a Fire Prevention Week theme: Prevent Home Fires! Many organizations are expanding these efforts by declaring the entire month as a time to focus on home fire safety.
“One of the biggest threats to any residence, and to the people who live there, is fire. Ironically, fires in homes are the least considered threat by homeowners. This alone is one of the major reasons the United States suffers the highest fire death rate in the industrialized world,” says J. William Degnan, New Hampshire State Fire Marshal.
This year's theme focuses on preventing fires in the home, where we spend most of our time and where 80% of fire deaths occur. The leading causes of fires in homes are cooking, heating equipment, and electrical. People can protect themselves from fire by taking some basic safety precautions.
Pay particular attention while cooking, especially when using oils and grease. Cooking appliances should be kept clean of grease build-up, which can easily ignite. Applying a lid to a small grease fire is usually the most effective and safest method of controlling it. Trying to carry a pan that's on fire is extremely dangerous because it can ignite clothes or spill, causing severe burns. If the fire is inside your oven, turn off the heat and leave the door closed to cut off the fire's air supply. Young children should be kept away from cooking appliances to prevent any mishaps. It's always a good idea to use back burners when possible and keep pot handles turned to the inside so they won't be pulled or knocked over. Check stoves and other appliances before going to bed or leaving your home to make sure that the units are left in the off position.
According to the NFPA, electrical distribution and lighting equipment are involved in 20,800 home fires per year. To help prevent electrical fires, frayed cords should be replaced or repaired on all electrical devices; extension cords should not cross doorways or be placed under carpets or rugs; ground fault circuit interrupter electrical outlets should in installed in kitchens, bathrooms, outdoor areas, basements, and garages; and overloading receptacles should be avoided.
Lebanon Fire Chief Chris Christopoulos, President of the New Hampshire Association of Fire Chiefs, says working smoke alarms should be a priority at any time of year. This is a great time to test your alarms to make sure they are working. Having working smoke alarms and a prepared and practiced emergency escape plan will help ensure your survival in a home fire. "Many communities in the United States are taking safety a step further by installing residential sprinkler systems. Fire sprinklers and smoke alarms increase your chances of surviving a fire to 82%. An added benefit is that fire sprinklers also protect the lives of firefighters. The majority of firefighter injuries and deaths occur fighting residential fires."
Electric heaters should have automatic safety switches to turn them off if tipped over. They also should carry the UL approval label. Be sure to check cords before plugging in the heater. If frayed, worn, or broken, do not use. Either replace the heater or have an electrician replace the cord. Just putting tape on the cord is not enough to prevent overheating and fire. Never use extension cords with portable heaters. Supplying a heater with a small, ordinary household extension cord will cause the cord to overheat and burn. Keep all materials that can burn at least 36 inches away from the unit.
Many kerosene heater fires are attributed to the misuse or abuse of the devices. Get started on the right foot by purchasing a heater that carries the UL label. This means it has been tested for safety. Be sure it has an automatic safety switch to shut it off if it's tipped over. An automatic starter eliminates the need for matches and makes for safer starts. A fuel gauge will help ensure you do not overfill the heater. A safety grill on the front can prevent accidental contact burns. Follow the manufacturer's instructions for assembly. Use only crystal-clear 1K kerosene; never use a yellow or contaminated kerosene or any other fuel. Fill it only outside. Store kerosene outside in a metal container with a tight-fitting lid that is clearly marked for kerosene. When using kerosene heaters, be sure the room is well ventilated. Opening a door to an adjoining room or area may be enough. Better yet, open a window in the room.
Wood stoves and other wood-burning devices are popular heating systems. Before investing in one for your home, think as much about safety as you will about the ease of use, efficiency, and appearance. Have your stove installed by a professional. Keep a tight-fitting screen or glass doors in front of the stove or fireplace at all times. Special retaining screens can keep children and pets away from wood stoves and prevent burns. Dispose of ashes in metal containers, never in paper bags, cardboard boxes, or plastic wastebaskets. Wet ashes down to cool them thoroughly. Remember, ashes can retain enough heat to cause a fire for several days, so take no chances. Although these tips should help prevent a fire, know the signs of danger. Loud roars, sucking sounds, and shaking pipes mean trouble and danger. If you hear these sounds, get everyone out of the house. Quickly shut off the fire's air supply by closing any air-intake vents in the firebox. Close the damper. Call the fire department from a nearby phone.
For the past fifteen years, the number one cause of fires in New Hampshire has been linked to solid fuel-burning appliances. These include wood, coal, corn, and pellet stoves and furnaces. These devices have improved over the years and should be treated just like any other machine or appliance. In order for them to work properly, they have to be maintained regularly. Just as you normally take your car to the mechanic to have the oil changed and other preventative maintenance performed, you have to do the same with heating appliances, regardless of the fuel type.
The recent rise in fuel prices has led a lot of folks to start thinking of alternative heating appliances. Whether you are dusting off that old wood stove in the garage that you haven't used in a while or going to the store to buy a new one, make sure you plan out your installation properly. Appliance manufacturers design and build these appliances to very strict tolerances for things like clearances to combustible surfaces and venting arrangements. Make sure that you follow the manufacturer's installation instructions very carefully when installing a heating appliance. If you can't find the instructions, contact the manufacturer for another copy. Many manufacturers have copies of these important documents on their websites. If you are unable to locate such a document, it probably means that the appliance is too old and you should consider replacing it with a newer one.
New technologies are coming out every day with regard to heating appliances. Gas appliances are getting smaller and more efficient. The important thing to remember when burning any fuel, solid, liquid, or gaseous: Fire needs air. Every fuel-burning appliance requires combustion air. Today, many folks overlook this important fact as they tighten up their homes for energy efficiency. When a fuel-burning appliance starves for air, the burning characteristics change drastically, and the production of lethal carbon monoxide increases dramatically.
If you have questions about your heating appliance installation, contact your local fire department.